Kingkong ET V2 ET100 ET115 ET125 Frame Kit w/ LED Buzzer Canopy Frame Board 4Pairs Propeller Prop Guard For RC Model Plane DIY

Kingkong ET V2 ET100 ET115 ET125 Frame Kit w/ LED Buzzer Canopy Frame Board 4Pairs Propeller Prop Guard For RC Model Plane DIY
  • Продавец
  • Список ценUS $21.25piece
  • Продажная ценаUS $21.25piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,9 (933)

Oписание продукта

Item Description


S500 PCB Frame Kit 500mm PCB Board with Landing Gear F FPV Quadcopter
- F550 upgrade quadcopter
- Learned arm design from DJI S800 EVO, and enhanced
- good work with Gopro Hero 3 2 Axis brushless gimbal for FPV
- PCB Center plate with solder point
- Frame only, no electronic parts.
 2212 920kv Motor
- Type : 22 x 12mm
- KV: 920rpm/V
- Voltage: DC 7-12V
30A simonk esc Specifications:
Cont Current: 30A
Burst Current: 35A
BEC Model: Linear mode
BEC Output: 5V  2A
Li-ion/Li-poly:2-4S,or Ni-MH/Ni-Cd:4-12NIMH
Size: 32*24*7mm
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5607 precision barometer
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
Package including:
1 set  Quadcopter frame kit  (as your choice)
4pcs 2212 920kv motor  (2 pcs CCW, 2pcs CCW)
4pcs motor cover red
1pcs battery belt as the gift
4pcs 30A simonk ESC
4pair 1045  propeller (default color is 2pair black, 2 pair red)
Pixhawk 2.4.8  32bit ARM Flight Controllerx 1
Safety buttonx 1
Buzzer x 1
4G TF card(IO firmware has written)  x1
Mini OSD x1
PPM x1
I2C x 1
Power module X1 
M8N GPS × 1
Black GPS holder x 1
Note: You choose X500 and S500 frame, the arms color we send are all black; If you choose F450 frame, the arm color we send is 2pcs red and 2pcs white.






Item Pictures




s500 pixhawk